Hydrogen direct reduction using low-grade iron ore successfully completed in pilot operation
In a pilot operation, Nippon Steel has produced directly reduced iron (DRI) from low-grade iron ore using 100 per cent hydrogen. During the test run, which lasted over 300 hours without interruption, the Japanese steel company was able to produce more than 1,000 tonnes of DRI.
Key facts at a glance:
- 1,000 tonnes of H2-DRI produced in a pilot shaft furnace
- Using low-grade iron ore for direct reduction is fundamentally feasible
- Aiming for market-ready technology by 2040
Nippon Steel has successfully carried out a direct reduction trial using 100 per cent hydrogen as a reducing agent in a pilot shaft furnace at its research and development centre in Hasaki, Japan (furnace height approx. 60 m, production capacity 1 t/h, commissioning in March 2026). A lower-grade iron ore (blast furnace pellets) was used as the raw material instead of the high-grade iron ore (direct reduction pellets) normally employed. The trial ran for 300 hours in continuous operation and produced a total of over 1,000 tonnes of direct-reduced iron (DRI).
According to the company, overcoming a number of technical challenges was crucial to the success of the project, in particular the endothermic nature of reduction reactions with pure hydrogen and the tendency of lower-grade iron ore to pulverise – thereby ensuring stable DRI production. According to Nippon Steel, this represents an important step towards the commercialisation of “the production of direct reduced iron using hydrogen, a groundbreaking ironmaking technology for climate-neutral steel production”.
100 million tonnes of natural gas-based DRI worldwide per year
Globally, around 100 million tonnes of DRI are currently produced annually in commercial, natural gas-fired reduction furnaces. As CO₂ is released during natural gas reduction, the development of hydrogen reduction technologies is crucial for decarbonisation. However, reduction using hydrogen alone is an endothermic reaction, which leads to a sharp drop in the internal furnace temperature. Stable reduction operations therefore require advanced temperature compensation technology to maintain a constant internal furnace temperature.
Limited availability of high-quality DR iron ore
Furthermore, existing commercial reduction furnaces are based on the assumption that high-grade iron ore with a high iron content and minimal impurities will be used. However, the availability of high-quality iron ore is limited. To secure future sources of iron ore, it is therefore essential to develop technologies that can also utilise abundant, low-grade iron ore. However, low-grade iron ore tends to pulverise during reduction, which impairs gas permeability within the furnace and reaction control. Consequently, its use presents a significant technical challenge.
As part of this initiative, Nippon Steel achieved stable operation of the pilot shaft furnace by applying an optimal thermal compensation technology developed for the endothermic reaction in direct hydrogen reduction, as well as through operational techniques that suppress the pulverisation of low-grade iron ore.
Target: Market-ready technology by 2040
Nippon Steel will continue its trials on the ‘production of directly reduced iron using hydrogen’ in the pilot shaft furnace in order to establish the direct reduction technology and optimise operating conditions. Furthermore, from the financial year 2027 onwards, Nippon Steel will drive forward development, including scale-up technologies, with the aim of establishing a market-ready technology by around 2040, thereby contributing to the realisation of a carbon-neutral society.
This project was selected in January 2022 for the Green Innovation Fund Project run by the New Energy and Industrial Technology Development Organisation (NEDO), and an extension of the fund was approved in November 2023. Among the projects, the project ‘Hydrogen utilisation in iron and steel manufacturing processes / Development of a direct hydrogen reduction technology that reduces iron ore using hydrogen alone’ is being driven forward by a consortium of three organisations: Nippon Steel, JFE Steel Corporation and the Japan Research and Development Centre for Metals (JRCM).
Source: Nippon Steel
Conclusion:
Nippon Steel’s pilot trial demonstrates that, in the medium term, even low-grade iron ore can be used for direct reduction with hydrogen. However, the development of a marketable technology still requires further research.